Just getting ready to start WSR business..
Posted: January 26th, 2006, 8:29 pm
Hi to all.. I guess just like alot of other new people here, I have been reading these boards and soaking up as much information as I can about the WSR business. I am just now scheduling my training and will be taking the WSR training within the next month. I am mechanically inclined and had my own house painting company for a number of years. Whenever I had a problem in the painting business, a hole in the wall, cracks etc I was always able to fix the problem by filling,sanding painting over the problem area until I got it right. If I didn't get it right the first time there was always the oppotunity to keep repairing the area until I did get it right. It seems in the windshield repair biz there is not much room for mistakes, and if you mess up, you potentially can ruin the windshield. I guess my main question would be, when you run into a problem repairing a windshield and your in the field, does calling a tech for help over the phone really work to walk you through the problem?? Have any of you called about a problem repair and not been able to explain or fix the repair properly over the phone? I guess I am just concerned about starting on a job and getting stuck and then looking like an idiot for not being able to finish the repair.
Anyway, I just wanted to say this is a great forum and I have been reading all the pasts posts and have learned quite a bit here. Thanks to Delta and all the guys and gals who share their ideas here. I'm learning alot!!
CA_beachguy
Anyway, I just wanted to say this is a great forum and I have been reading all the pasts posts and have learned quite a bit here. Thanks to Delta and all the guys and gals who share their ideas here. I'm learning alot!!
CA_beachguy