Jeff,
Can you shed any light on the ROLAGS for us?
Jeff Higgins
-
- Member
- Posts: 434
- Joined: August 9th, 2003, 3:11 pm
- Enter the middle number please (3): 5
- Location: West Monroe,La.
- Contact:
-
- Moderator
- Posts: 1194
- Joined: August 9th, 2003, 4:00 am
- Enter the middle number please (3): 5
- Location: Eugene OR
- Contact:
Re: Jeff Higgins
R.O.L.A.G.S. = Repair of Laminated Automotive Glass Standard
Matt's on that committee, i'll see if he wants to chime in with an update.
So far, they're trying to create an ANSI standard, and the first draft is posted at http://www.deltakits.com/rolags
So, i'll try to get Matt on here, but he's not too good on the book learnin', so I might have to show him how these computer things work.
Matt's on that committee, i'll see if he wants to chime in with an update.
So far, they're trying to create an ANSI standard, and the first draft is posted at http://www.deltakits.com/rolags
So, i'll try to get Matt on here, but he's not too good on the book learnin', so I might have to show him how these computer things work.

Delta Kits, Inc.
-
- Senior Member
- Posts: 796
- Joined: August 24th, 2003, 12:00 pm
- Enter the middle number please (3): 5
- Location: San Jose California
Re: Jeff Higgins
Jeff,
What are the standards for long crack repair. Is this another thing where they are not recommending that long cracks be fixed?
David
Coitster
What are the standards for long crack repair. Is this another thing where they are not recommending that long cracks be fixed?
David
Coitster
Glass
Who is online
Users browsing this forum: No registered users and 26 guests