Page 1 of 1
How lomg can it be
Posted: July 18th, 2006, 4:31 pm
by detailguy1954
Hello all
How long can a crack be and what is the longset one any ond did. thank
Richard:eusa_wall
Re: How lomg can it be
Posted: July 18th, 2006, 4:45 pm
by GlasWeldTech
I have fixed my son's dodge dakota from side to side before he traded.
Re: How lomg can it be
Posted: July 18th, 2006, 6:47 pm
by glassfixerCO
Even more important than the crack's lenght is the age of the crack. If it's a fresh crack that's been spreading fast (maybe on a hot day) you can sometimes get great results even if it's very long. But if the crack is contaminated w. moisture and\or dirt even a small crack will look bad after the repair.
Re: How lomg can it be
Posted: July 21st, 2006, 6:15 am
by toab
The cracks gotta be fresh or the finished work looks bad.Still trying to find a way to flush the dirt out of a crack but no luck thus far.Any body got any ideas that work for them??
Re: How lomg can it be
Posted: July 22nd, 2006, 3:57 pm
by glassfixerCO
I used to use compressed air, but I'm not sure if it worked or not since the cracks might have filled the same without it.
Re: How lomg can it be
Posted: July 26th, 2006, 1:25 pm
by screenman
Novus had a crack cleaning system out in 1988. It was a very long job to do and personaly I would rather educate the customer into getting the job done quicker. Make them pay for a replacement evry once in a while. With fleet and trade customers if they do not buy a screen every so often , they start to think of you as an expense rather than a saving.