New I-100
-
- Senior Member
- Posts: 949
- Joined: August 11th, 2003, 7:39 am
- Enter the middle number please (3): 5
- Location: Pennsylvania
- Contact:
Re: New I-100 Injector!!
How about some info on that even newer injector you are working on guys!!!!
Safe Glass Technologies
2012 WRO Gold
2009 WRO Gold
2009 WSRPOTY
2008 WRO Silver
2012 WRO Gold
2009 WRO Gold
2009 WSRPOTY
2008 WRO Silver
-
- Member
- Posts: 434
- Joined: August 9th, 2003, 3:11 pm
- Enter the middle number please (3): 5
- Location: West Monroe,La.
- Contact:
Re: New I-100 Injector!!
How much measurable vacuum does it pull?
-
- Moderator
- Posts: 1194
- Joined: August 9th, 2003, 4:00 am
- Enter the middle number please (3): 5
- Location: Eugene OR
- Contact:
Re: New I-100 Injector!!
Spoken like a true GlasWeldTech! Doesn't matter if it can do a repair, as long as it can stick to your finger in the vacuum cycle! Just teasing you GWT!GlasWeldTech wrote:How much measurable vacuum does it pull?
How about enough to remove all air from a break without reintroducing air when put back in the pressure cycle? That help?
Delta Kits, Inc.
-
- Member
- Posts: 434
- Joined: August 9th, 2003, 3:11 pm
- Enter the middle number please (3): 5
- Location: West Monroe,La.
- Contact:
Re: New I-100 Injector!!
Now if you would just send me one to evaluate and field test to get some on the job trials and tribulations of the latest and greatest!!!!!!!!!
-
- Moderator
- Posts: 1194
- Joined: August 9th, 2003, 4:00 am
- Enter the middle number please (3): 5
- Location: Eugene OR
- Contact:
Re: New I-100 Injector!!
Sure, no problem...Training is free, come on up to Eugene and i'll show you around! Plently of lakes and rivers to go fishing even!GlasWeldTech wrote:Now if you would just send me one to evaluate and field test to get some on the job trials and tribulations of the latest and greatest!!!!!!!!!
Delta Kits, Inc.
Re: New I-100 Injector!!
But seriously Jeff, in the picks I see no seals, so how do you create a vacumm in a non sealed enviroment? I have your injectors(old ones), and have yet too see any vac. Some explinations would greatly help us to understand the theory behind the injector.
Re: New I-100 Injector!!
Bruno wrote:But seriously Jeff, in the picks I see no seals, so how do you create a vacumm in a non sealed enviroment? I have your injectors(old ones), and have yet too see any vac. Some explinations would greatly help us to understand the theory behind the injector.
The seal is right where it's supposed to be, at the end. Have another look.
http://www.deltakits.com/dki-catalog/i-100.html
Re: New I-100
So if I were to order two of these tomorrow or the next day, what are the biggest differences that I would notice vs. your last model which I am very impressed with?
Re: New I-100
Mike
Thanks for the answer, but I was refering to piston seals. The end seal provides limited space for vac.
Jeff
Are you on vacation, usualy your answers are faster?
Thanks for the answer, but I was refering to piston seals. The end seal provides limited space for vac.
Jeff
Are you on vacation, usualy your answers are faster?
Who is online
Users browsing this forum: No registered users and 10 guests