Page 1 of 1
carbide burs
Posted: August 9th, 2006, 9:30 am
by ag4l
just wondering what is a good size bit.
Re: carbide burs
Posted: August 9th, 2006, 10:35 am
by Delta Kits
ag4l,
What do you use it for? Drilling all the time? Only to pop bullseyes on long cracks? Give us a bit of info on your intended use, and someone will let you know what they like for that application.
Re: carbide burs
Posted: August 9th, 2006, 11:33 am
by ag4l
use for bullseyes. thank's
Re: carbide burs
Posted: August 9th, 2006, 2:17 pm
by Delta Kits
You mean popping bullseyes on long cracks, correct?
Re: carbide burs
Posted: August 9th, 2006, 3:11 pm
by GlasWeldTech
Get Delta's FG-701 as good as any I have used.
Re: carbide burs
Posted: August 9th, 2006, 3:29 pm
by Delta Kits
If you're using them to pop bullseyes on long cracks, I would recommend the FG-701 (if you're going with a DKI product), as GlasWeldTech said. It's not the smallest, but it wears quite a while, and drills a big enough hole to get your probe down to pop.