Page 1 of 1
Fleet Accouts
Posted: July 13th, 2003, 12:59 pm
by Anonymous
anyone ever had this happen? I cleaned my equipment at the end of the day and put it a way. the next day I started to do a job and when I locked the plunger in the up position it stuck! it wont budge I have tried everything and cant figure out what happened let alone how to fix it.
can anyone help me?
oh yea its a delta brand bridge and plunger
Stuck Plunger
Posted: July 13th, 2003, 1:50 pm
by Guest
Mr. Chips,
Those injectors have a lifetime warranty, and we are very interested to see what could have caused it to stick.
Give us a call Monday at 888.811.3451, and we will arrange for you to ship your injector back and replace it.
Thanks!
Jeff Higgins
Delta Kits, Inc.
[email]"jhiggins@deltakits.com"[/email]
www.deltakits.com
Re: Stuck Plunger
Posted: July 13th, 2003, 5:25 pm
by Anonymous
Hello mrchips
When you clean your kits are you soaking your injector parts in denatured alcohol? If not that might be your problem I soak mine in a jar over night about once a week or so been using delta kits for about 10 plus years never seen a plunger stick unless there full of resin and not cleaned right.
Good Luck and Happy Repairing
Brian