Page 1 of 1
Premium Bond resin by the liter
Posted: January 14th, 2007, 5:20 pm
by AGSS
Does anyone buy the liter of resin? This sounds like a tremendous savings!
1 oz at $55 x approx. 33 at $1815 or a liter at $412 a $1400 savings? :eusa_thin
does resin go bad or have a short shelf life?
how is the liter packaged?
Re: Premium Bond resin by the liter
Posted: January 14th, 2007, 9:32 pm
by GlasWeldTech
I buy a liter at a time.
Re: Premium Bond resin by the liter
Posted: January 15th, 2007, 9:04 am
by Delta Kits
To all who saw what was posted here, I sincerely apologize. As a moderator, I cannot be here 24/7 (only 23/7

) and occasionally something like this will slip through. I have now made it so all new members must be approved, and this will hopefully cut down on this type of spam. Again, I apologize.
Back to the subject:
Our Liter's are packaged in heavy duty plastic containers, and you can purchase empty bottles to fill from your Liters.
Re: Premium Bond resin by the liter
Posted: January 15th, 2007, 1:06 pm
by wilz
Jeff, what is the selve life for a litre?
Re: Premium Bond resin by the liter
Posted: January 15th, 2007, 2:48 pm
by Jerry Martin
wilz;22523 wrote:Jeff, what is the selve life for a litre?
I am using a resin that is at least eight years old and there is nothing wrong with it. I swear!
Stored in a drawer inside my house, cool and dark place.
Re: Premium Bond resin by the liter
Posted: January 15th, 2007, 3:25 pm
by Delta Kits
I wish we had a short shelf life.
Let's put it this way. If your resin "goes bad" without being exposed to UV (cured), we will replace it.
For one of our major customers, they require a shelf life of no more than two years, so that's what we do. In reality, we have resin still in testing that is over 10 years old, still works just fine.
Re: Premium Bond resin by the liter
Posted: January 15th, 2007, 3:28 pm
by Delta Kits
I should add, also keep it in the Liter bottle until ready for use. Don't just fill 70 bottles at once. Keep it out of the light, closet or something, away from temperature extremes, humidity, etc.
Re: Premium Bond resin by the liter
Posted: January 15th, 2007, 4:06 pm
by wilz
Thanx guys.