Page 1 of 2
How Would Rate These Damages For Pricing
Posted: February 10th, 2007, 10:53 pm
by m8829
Hi Everyone,
How would you rate the following damages in terms of how much you would charge ? (Rating 1 for lowest price charged and Rating 5 for highest price charged) Assuming sizes of damage is the same.
Bullseye
Half Moon
Star
Combination
Crack
Thanks
Re: How Would Rate These Damages For Pricing
Posted: February 10th, 2007, 11:20 pm
by Coitster
I charge the same for all chips. Doesn't matter what type they are. A long crack repair is $95 bucks.
Re: How Would Rate These Damages For Pricing
Posted: February 10th, 2007, 11:24 pm
by m8829
Coitster;23106 wrote:I charge the same for all chips. Doesn't matter what type they are. A long crack repair is $95 bucks.
Hi Coitster
Would this imply that the time taken and technical expertise required to fix all types of damages are the same? (except cracks of course).
Re: How Would Rate These Damages For Pricing
Posted: February 10th, 2007, 11:39 pm
by GlassStarz
Dude the customer only knows there is a chip in his windshield you dont really propose to give them some half as* spiel on the variety of chips so because they have a type A chip the price is? lets face it dude in the customers eyes a chips a chip some are more difficult to fix so be it flat rate per repair is the industry standard lets not confuse the customer any more than they already are.
Re: How Would Rate These Damages For Pricing
Posted: February 11th, 2007, 12:07 am
by Coitster
Stars and combo's are the most difficult. However the customer doesn't know that or care. You will have to charge the same for different chips. Long cracks are completely different. I wouldn't touch long cracks until you have done this fora few years. Must harder to fix, and takes lots of patience.
David
Coitster
Re: How Would Rate These Damages For Pricing
Posted: February 11th, 2007, 12:10 am
by m8829
Hey Guys thanks for the feedback. David what constitutes a long crack?
Thanks
Re: How Would Rate These Damages For Pricing
Posted: February 11th, 2007, 6:57 am
by AGSS
I believe Delta describes it as a crack over 5 inches. I don't do them yet, still practicing.
Re: How Would Rate These Damages For Pricing
Posted: February 11th, 2007, 7:27 am
by Dave M
Go to: http:/
www.deltakits.com/rolags/
print a copy of the ROLAGS(repair of laminated automotive glass standard)
Re: How Would Rate These Damages For Pricing
Posted: February 11th, 2007, 10:21 am
by screenman
All I know is charge a lot and do a lot works for me. Long cracks on our pricing is anything over 2 inches, makes the customer try harder to get them fixed quicker. As you all know we do very long cracks on many large vehicles, with glass costing over
Re: How Would Rate These Damages For Pricing
Posted: February 12th, 2007, 11:15 am
by rescue
I charge $75 for everything. Cracks up to 12" only.