Page 1 of 1
Posted: November 8th, 2003, 8:33 am
by dentmedic
OOPS!
Yesterday it happend.
I slipped and made a 1/4" scratch.
Can anything be done?
Should be able to sand out with 2500 grit and posihed.... Right?
Thanks,
Jason
Drill Slip = Small Scratch
Posted: November 8th, 2003, 11:32 am
by Coitster
Hey Jason,
WHATEVER you do DON'T USE SAND PAPER ON GLASS!!!!!!!!!!! It's not like on PDR when you can do that. On glass you are going to need to find a glass polisher. Most of the time, if your drill slips you are pretty much left with a scratch. Not really much you can do.
David
Coitster
resin suppliers
Posted: November 10th, 2003, 6:03 pm
by gold star wsr
If you say "Oops", dont say it loud enough for the client to hear you. Yes, we do try to avoid this happening, but it still occasionally does, and we feel bad about it. But as a general rule, the client wont notice unless you sign your full name.
Posted: November 11th, 2003, 9:57 pm
by gaf
I have used a little pit filler to fill in the little "oops" before it kind of takes out the whiteness of the scratch.