MAGNIBOND VS PROBOND 5040 VS PROBOND 5060
Posted: August 26th, 2009, 9:43 pm
Had anyone notice a difference in there repairs using either of these resins? What i mean is better visually, faster or least to fail and crack out.
Windshield Repair Forum
This windshield repair forum will be used for the benefit of windshield repair technicians, regardless of their equipment manufacturer.
https://www.windshield-repair-forum.com/
MAGNIBOND VS PROBOND 5040 VS PROBOND 5060
https://www.windshield-repair-forum.com/viewtopic.php?t=4983
Page 1 of 1
Re: MAGNIBOND VS PROBOND 5040 VS PROBOND 5060
Posted: October 26th, 2010, 12:27 pm
I would love to know... just getting to order a liter of somthing...
Re: MAGNIBOND VS PROBOND 5040 VS PROBOND 5060
Posted: October 26th, 2010, 4:02 pm
Great info! Thanks!
One other question though... is Magni as strong? Is it more likely to allow a run a year later on a -30F day?
One other question though... is Magni as strong? Is it more likely to allow a run a year later on a -30F day?
Re: MAGNIBOND VS PROBOND 5040 VS PROBOND 5060
Posted: October 27th, 2010, 5:36 pm
Bruce McDonald wrote:All kidding aside, I would not recommend doing repairs at -30F, .
Yep, I have found that while the equipment seems to work OK in the extreme cold, my finger dexterity stops at about 15+F, so since I am a frail older man, I don't have the good blood flow of some of the young fellas. Thanks for the great advice!