Page 1 of 1
Thank you David
Posted: December 1st, 2003, 8:30 pm
by john eltoro
has anyone expierienced small black lines or spots inside the pit after completion of a repair?
i am getting these spots after curing the pit. prior to applying the pit filler the pit is clear. any suggestions of what this may be?[/b]
It is nice to hear from people that are....
Posted: December 2nd, 2003, 8:35 am
by gold star wsr
What is your definition of 'pit' ? If you are referring to the impact site or drill hole where you inject the resin into the break, no, I have not experienced any thing like that. If you mean the rock chip (the area you have filled with resin), I have had this happen with certain types of breaks..most notably half-moons and bull's eyes, where it looks like an eyelash laying on the glass, or a couple of dark dots. Structurally, they are not usually any cause for concern. Cosmetically, though, wanting to do the best-looking repair possible, these things can be frustrating. Try curing under pressure.
bits
Posted: December 5th, 2003, 10:59 am
by desertstars
"After" curing the pit?
"Prior" to applying the pit filler?
Is your pit filler contaminated?
Could be.