Windshield Repair Forum

The Google button on the internet machine is telling me my delta kit package is out for delivery. I am stoked to get started.

So my new business plan to get started is my business card and a base ball bat...anyone had any luck with this before?

Jokes...for now

I am going to take before and after pics of my first attempt and post them for critique.

Cheers!

Good Luck!

I remember my first day....many, many moons ago.

If you can keep your eveyday enthusiasim at the first day level, you will knock it out of the park. Much success to you.

Boring old me, make those practise damages wet, I mean very wet before you start them.

Best of luck and post those picture's it is the easiest way for us to see if you are going wrong.

Good luck
Remember no question is dumb question, so ask all the questions you have on this forum because there is a lot of knowledge on the forum. I have learned some good and bad habits from forum members. Keep us posted

All right I have been hard at it. And for the most part feel good.

The HLR was good to go, no worries there.

The WSR has left me with a few questions:

1. How do you take a good clear pic of a crack? Whats the trick cause then it would make 2. and on much easier

Let me know and I will get a pic up and post my ponderances

When taking pictures of damage it is best to set the camera in macro mode and turn the flash off. If your camera has a timer use it also use a tripod or place your camera on a table so it won't move.

It also helps to take a Sharpie marker and draw an arrow on the glass pointing to the damage, otherwise the camera has trouble focusing on the damage and will focus on something through the glass leaving the damage looking blurry.

Draw a circle on a piece of paper and tape on the inside of the ws- now use macro setting as mentioned and the camera has something to focus on.
You can also place your mirror inside and take your picture of the mirror image-this is my new way and works well for me.

thanks all...I will get the pics in the morning and post.

beofre then:

-how much manual pressure on a delta kits injector should be applied and for how long to shorten the pressure cycle from 15 to 5 min?

thanks