This windshield repair forum will be used for the benefit of windshield repair technicians, regardless of their equipment manufacturer. https://www.windshield-repair-forum.com/
The following video demonstrates the step-by-step process on how to properly clean and maintain your Delta Kits I-100 injector.
Re: Most efficient way to clean tools?
Posted: September 24th, 2010, 7:06 pm
by wingrider
What is the guy in the video using to spray on the tools? I may be mistaken but I thought Bruce said Delta kits didn't need cleaning after every use, he mentions after every 10th use? Did I mis-understand something?
Re: Most efficient way to clean tools?
Posted: September 24th, 2010, 7:23 pm
by Kgobin
In the video the technician is using canned air to clean the I-100 injector. We recommend cleaning with canned air or denatured alcohol between each repair and always cleaning with denatured aclohol if you will not be using the injector within a few minutes. Bruce probably mentioned that you should change your end seal every 10 repairs.
Re: Most efficient way to clean tools?
Posted: September 26th, 2010, 4:50 am
by wingrider
Kgobin wrote:In the video the technician is using canned air to clean the I-100 injector. We recommend cleaning with canned air or denatured alcohol between each repair and always cleaning with denatured aclohol if you will not be using the injector within a few minutes. Bruce probably mentioned that should change you end seal every 10 repairs.
Your right, I'm wrong. Thanks for clearing that up Kgobin.