Page 1 of 1
vacuum cleaner
Posted: January 15th, 2015, 2:40 am
by elvasozim
hello, i heard there is a piece of equipment which sucks out dust from a crack before you can treat it. were can i get such a thing. im in Zimbabwe (Southern Africa), so i need a supplier from anywhere in the world who is reliable and who will be able to send it to me
Re: vacuum cleaner
Posted: January 15th, 2015, 8:19 am
by Mr Bill
I do not think that such a piece of equipment exists.
Re: vacuum cleaner
Posted: January 16th, 2015, 8:21 pm
by old school
I agree with Mr. Bill
Re: vacuum cleaner
Posted: January 17th, 2015, 10:02 am
by screenman
On long open to the surface cracks I use compressed air from my compressor, this pushes the moisture out and drys out the rubber seal. Now with a crack like that you could use a strong vacuum and it might work.
For a damage not open to the surface you would create a vacuum with the damage but remove very little of the dirt once the vacuum was at it's maximum point, normally about 29inHg.
If a vacuum did work on a damage any other way we would suck out all the resin once we went onto vacuum mode.