Page 1 of 1

Posted: May 5th, 2004, 12:58 pm
by Steve
Hello everyone, former lurker here finally making my first post. First of all I would like to thank everyone for all the help, there is so much that can be learned from this forum. Special thanks to David Coit for allowing me to observe :shock: while he worked his magic in Dallas, he's a very sharp guy.
I'm in the process of signing up with Lynx and Safelite. Lynx is done, Safelite is dragging there feet, I just get a voice mail from them. Today I did my first insurance job :D using the Coitster's method and leave it to me to to get an insurance company (Germania ) that uses a network that I didn't know exhisted :x (Harmon). I went ahead and did the job but I am not sure how to handle it. Should I direct bill them or wait till I get set up with Harmon and process it then. Should I do the same with Safelite untill they get off there butt, just direct bill the Safelite ins. companys or what. Thanks for the input.

Posted: May 5th, 2004, 4:02 pm
by Repair1
Just call Harmon and get set up it should be real easy. The key is tell them your going to be doing the work not that you have done it.

Happy Repairing :wink:

Brian