What UV light do you use?

Anonymous · Post by **Anonymous** » March 26th, 2003, 8:04 am

I have been looking for a good UV light that is battery operated, durable, small and effective. I have used probably 7 different lights and have found one that I like ... unfortunately it is not manufactured any longer. Any links to websites would be appreciated.

Jeremiah's Windshield Repair
Portland Oregon
Brian Jeremiah

Anonymous · Post by **Anonymous** » March 26th, 2003, 12:09 pm

We use the new Glas Weld Pro Cure 360 degree curing lamp. Cures in 60 seconds. Also have 4 of their tube lamps.

Anonymous · Post by **Anonymous** » March 26th, 2003, 1:32 pm

I use the lamp that came with my kit. It is a DELTA 40-1 Lamp. It is 10"L x 3"W x 3"H. Mounts with suction cups. Very good UV intensity. It uses 6d batteries or can be used 12V. It is nice becusae it gives you a large curing area if you are doing lots of cracks. The downside to it is it is a little bulky and batteries are expensive. I would recommend this style lamp if you are strictly mobile as you may not always have access to an alternate power source. It does a great job. I myself will also be looking into the smaller curing lamps soon since I mainly see stone chips and would like to down size a little. I guess the main factor I will consider in my next smaller lamp purchase is the UV intensity.

Just my thoughts.

Pay it foward,

Brian
www.safeglasstechnologies.com

[email]"info@safeglasstechnologies.com"[/email][/email]

Anonymous · Post by **Anonymous** » March 26th, 2003, 2:54 pm

Bfenne, I have that exact light as well. It is indeed a bit bulky and the batteries are expensive. I put all my tools in a carpenter style belt and carry them around when I do fleet accounts. My current light fits in a pouch on my belt and is convenient but it isn't very intense and batteries don'to seem to last long. I iwll check out the glasweld system though.

Anonymous · Post by **Anonymous** » April 1st, 2003, 6:54 pm

I use the dual tube light from US Windshield...I liked it so well I bought a couple more. Glasweld and Liquid Resins have the same lights. At $100, they are not cheap, but I think they are a bargain. They are not cordless, but you can work all day off a portable jump starter battery if you want.

Anonymous · Post by **Anonymous** » April 1st, 2003, 11:19 pm

Hmmmm .. that light looks different than any I have seen .. I may give it a shot.. thank you much

Brian Jeremiah
Jeremiah's Windshield Repair
Portland Oregon
503-750-4567

Anonymous · Post by **Anonymous** » April 2nd, 2003, 3:24 pm

check out our website.http://www.glassmagicians.com we
also carry doublebulb light and we have small 4 battery
light.thanks

Anonymous · Post by **Anonymous** » April 2nd, 2003, 5:39 pm

MeleeECI... the rightlook light is actually the U.S. Windshield Repair light that I use. Rightlook just resells it for an extra $40. It's your money, not mine.

BTW, since this is Delta's site, I think they have a simiar model too,... I noticed a picture of one in their catalog.

Guest · Post by **Guest** » April 3rd, 2003, 8:31 am

In addition to the lights that we have at www.deltakits.com/dki/ultraviolet-lights.html, we have the long crack repair lights that have 16" bulbs, and also the dual tube lights. Both of these lights come in 115v or 12v.

Jeff Higgins
Delta Kits, Inc.
[email]"jhiggins@deltakits.com"[/email]
www.deltakits.comEdited by: deltakits at: 4/3/03 10:31:26 am

Anonymous · Post by **Anonymous** » April 3rd, 2003, 1:12 pm

A new light is being created especially for WRS people .. more info soon

Windshield Repair Forum

What UV light do you use?

re: correction

What UV light do you use?

Re: What UV light do you use?

Re: What UV light do you use?

Re: What UV light do you use?

9watt dual tube

Re: UV Light

u.v. light

rightlook light?

Re: Ultraviolet Lights

Who is online