Late afternoon repair?
Late afternoon repair?
Can you ,or any of you do repairs in the dark ? Is it possible to do a quality repair at night with the proper lighting?
Re: Late afternoon repair?
Oops, tricky question mate.
Our own findings are negative on this.
But remember; we have no workshops as we are mobile only.
We have found out that, in our situation, repairs are best done at daylight, just as told at wsr trainings.
Having said this, we have repaired during the night, in the ten years we are in business, of course, but only when there was no alternative at all.
Our own findings are negative on this.
But remember; we have no workshops as we are mobile only.
We have found out that, in our situation, repairs are best done at daylight, just as told at wsr trainings.
Having said this, we have repaired during the night, in the ten years we are in business, of course, but only when there was no alternative at all.
-
- Moderator
- Posts: 1194
- Joined: August 9th, 2003, 4:00 am
- Enter the middle number please (3): 5
- Location: Eugene OR
- Contact:
Re: Late afternoon repair?
Of course! As you said, with proper lighting, you can certainly do quality repairs. They are a bit more difficult, but no reason that you "can't" do them.Mr.Ping wrote:Is it possible to do a quality repair at night with the proper lighting?
Delta Kits, Inc.
Re: Late afternoon repair?
I have done a few. and turned out good. i used a power inverter and a 500 watt light. flash light as well. but to me it,s a lot harder to inspect your work and you see spots for a half hour after your done due to the 500 watt light. i may find something a little less bright. jim
-
- Senior Member
- Posts: 1951
- Joined: November 12th, 2003, 6:11 pm
- Enter the middle number please (3): 5
- Location: Southern California
Re: Late afternoon repair?
Gee I dont know ask the milion or so customers whose windshields are repaired indoors at garages/quick lubes/glass shops/detail shops etc is it dark outside?
All you need is a UV source to cure
All you need is a UV source to cure
-
- Member
- Posts: 159
- Joined: September 20th, 2004, 6:56 pm
- Enter the middle number please (3): 5
- Location: CA
Re: Late afternoon repair?
I started out using big lights and went small. Now I use a clip-on reading light that has a shade over the bulb or I use a little 6" flourescent light with black tape on one side to keep the glare out of my eyes. These go right on the glass. You also need something like an electric camping lantern so you can see your tools.
Who is online
Users browsing this forum: No registered users and 40 guests