Viewing Repair From The Inside

Post your windshield repair tips, questions, advice! Note there is a sub-forum specifically for business development questions.
Coitster
Senior Member
Posts: 796
Joined: August 24th, 2003, 12:00 pm
Enter the middle number please (3): 5
Location: San Jose California

Re: Viewing Repair From The Inside

Post by Coitster »

GlassStarz,
Just so you know I am the one training Tyler to fix windshields. Personaly I do not unlock the vehicle and when my repairs are done they look fantastic and are almost totaly invisable unless it was a very large chip. Some chips are still visible slightly from the inside especialy when they are near the customers line of site. The repair in question I witnessed being repaired by Tyler and he did a great job.

Special note for Tyler, he has started doing some very good repairs and has come a long way. I think that he will be a great tech very soon.
BTW to anyone who said that I disapeared...... here I am. :)
David
Coitster
Glass
CV Windshield Repair
Junior Member
Posts: 91
Joined: December 1st, 2005, 1:53 pm
Enter the middle number please (3): 5
Location: North Texas

Re: Viewing Repair From The Inside

Post by CV Windshield Repair »

I have noticed that the brand of resin can also make a difference in the final apperance of the repair. I have tried different brands and have noticed that some seem to hide the repair better. Some resins look good initally but after a few weeks have a tendency to shrink which causes the repair to be more visible than it was after it was repaired.
WIN-1

Re: Viewing Repair From The Inside

Post by WIN-1 »

The Coitster kindly took time to train me in Dallas-( Thanks again, buddy ) and after that I attended Delta training in Austin.
I learned that I need maximum access to perform well. If I must add heat it's from the inside. Half the flexing is done from inside, plus I need every angle possible to view the full extent of damage.
When I finish up with cleanup I always Wiindex the inside surface as well.

I had one lady insist after I explained what outcome to expect that her only concern was to prevent further cracking. It was an insurance job, but there was moisture I couldn't get out and not my best work from outside.
The damage was below the acute area, but when she got in the driver's seat the sun hit just right and the prism effect looked bad. I never even billed on it because she complained so much.
Ken
glassdoctor
Senior Member
Posts: 733
Joined: November 13th, 2003, 9:24 am

Re: Viewing Repair From The Inside

Post by glassdoctor »

If there was more than a trace of water in it and it was quite visible afterwards as you explained, then you shouldn't charge for it even if she didn't complain.

That repair is not "right" and it's not the kind of job you want to stake your name on. And it will look even worse in a few weeks... the "extremeties" of the break where the water was trapped will dry and look "even more" unfilled, so to speak.

These "wet" repairs also are less effective at "preventing further cracking" because they still have, in effect, unfilled legs etc.

So even that sales angle "it may not look great, but...." is questionable.
Dave M
Senior Member
Posts: 648
Joined: August 9th, 2003, 6:13 am
Enter the middle number please (3): 5
Location: Westbrook, ME

Re: Viewing Repair From The Inside

Post by Dave M »

What works for some may not work for others. If Coister is doing great repairs without using a mirror, we can't argue with that result. In my 12 years repairing I've always used a mirror and have always requested that the vehicle be unlocked or let me have the keys to unlock it.
Why, you ask? Using a mirror gives me a view of the break that I could not get without using one. Also, my mirror has a slight magnification. I want the vehicle open for numerous reasons...put on the mirror, open windows on hot days, turn on the heater on cold days and with permission get the insurance card and/or registration out of the glove box.
What I don't understand is the security issue. I've never had a customer refuse to give me the keys or tell me where the keys will be if they are not around when I do the repair.
Coister, how are you? Have not heard from you in a while.
Here's my theory on the security issue. Other than my regular accounts...dealers, rentals and fleets I do not "coister" for my work. All my other appointments have been made from customers who have contacted me or from referrals. They called me for a w/s repair and if asked by me to leave vehicle unlocked or that I need the keys, they feel safe doing so.
Look at it this way. If you are having repairs done on the outside of your home and the carpenter that you hired needs to get into the house for whatever reason, would you feel safer letting him in or John Doe the contractor who comes knocking at your door saying you need exterior repairs.
There's absolutely nothing wrong with "coistering" (not a phrase originated by me, goes way back in the posts) because it works for a lot of people. What works for some may not work for others!
BPIZ

Re: Viewing Repair From The Inside

Post by BPIZ »

Can you please define coistering for us new guys. Thanks.
tyler99

Re: Viewing Repair From The Inside

Post by tyler99 »

Coister (David Coit) is a great guy that has been doing repairs for about 13 years. He used to live in Texas and now is in California.

I have had the pleasure of riding with him on 10-20 repairs and his repairs look really good when he is finished.

I think the main theme I have gotten from him is not to rush the job and take the extra time to make sure the job looks excellent.

If you read this David, thanks for the time and training man. I appreciate it!
Dave M
Senior Member
Posts: 648
Joined: August 9th, 2003, 6:13 am
Enter the middle number please (3): 5
Location: Westbrook, ME

Re: Viewing Repair From The Inside

Post by Dave M »

Type in "Coistering" in the search part of the forum and go to the post about overcoming objections. David Coit (spelling) did have a very nice post explaining his method but I could not find it!
Basically "coistering" is cold calling and closing the sale.
GlassStarz
Senior Member
Posts: 1951
Joined: November 12th, 2003, 6:11 pm
Enter the middle number please (3): 5
Location: Southern California

Re: Viewing Repair From The Inside

Post by GlassStarz »

Of course with years of experience you can start cutting a corner or two and make great repairs that said I stand by my previos statement you must be able to see the repair from inside and a new tech who hasnt been shown this hasnt been taught everything he needs to know. Years of experience by the trainer doesnt transfer to years for a new tech. I also dont open the car often anymore but you can bet I at least look at it through the side window before I call it done
Post Reply

Who is online

Users browsing this forum: No registered users and 34 guests