kit cleaner

autoglass in rf · Post by **autoglass in rf** » March 22nd, 2006, 4:06 pm

What is the best product to use for cleaning me kit after i've done a repair?

Post by **Delta Kits** » March 22nd, 2006, 4:38 pm

If you mean your injector, I would use denatured alcohol.

SGT · Post by **SGT** » March 22nd, 2006, 6:42 pm

I also use denatured alcohol. Couple hints....Don't let your injectors soak for extended periods, the tip seals may swell. Usually a minute of sloshing around does a good job. 2. Change out your solution after a few cleanings to prevent recontamination. Also make sure you wipe off any resin that might get on your bridge suction cup.

dingmedic · Post by **dingmedic** » March 22nd, 2006, 9:33 pm

Jeff is right on.... as usual, denatured alcohol. Dawn

PS try not to let your rings...ie rubbers as we call them touch the alcohol, just a quick cleaning with a non particle towel. Dawn

toab · Post by **toab** » March 22nd, 2006, 10:50 pm

I gotta quit useing acetone ..it's way too strong.

autoglass in rf · Post by **autoglass in rf** » March 23rd, 2006, 6:58 am

Thanks for your replies.
denatured alcohol it is.

Mike Allen · Post by **Mike Allen** » March 23rd, 2006, 11:36 am

where can denatured alcohol be found?

Emagdnim222 · Post by **Emagdnim222** » March 23rd, 2006, 11:48 am

i found it by the paint thinner at walmart.

suzuki · Post by **suzuki** » March 23rd, 2006, 5:51 pm

what about the commpress air,the one for cleaning keyboard?

Mike Allen · Post by **Mike Allen** » March 24th, 2006, 6:36 am

I've used the canned air and think that it doesn't really last long enough for $5. But maybe I'm just cheap.

Windshield Repair Forum

kit cleaner

kit cleaner

Re: kit cleaner

Re: kit cleaner

Re: kit cleaner

Re: kit cleaner

Re: kit cleaner

Re: kit cleaner

Re: kit cleaner

Re: kit cleaner

Re: kit cleaner

Who is online