Cold westher crack out!!
-
Shepard
Re: Cold westher crack out!!
The week before last I was doign repairs at 5 degrees.... I actually like glass to be 20 to 60 degrees when I work on it...
-
Glasseye
- Member
- Posts: 380
- Joined: March 7th, 2006, 12:41 pm
- Enter the middle number please (3): 5
- Location: England, Staffordshire
Re: Cold westher crack out!!
Rottdawg,
My advice to you would be to make sure you see all the visible legs flexing(from the outside of the glass) before you start to repair. This should ensure a) good access for the resin and b) show up any hidden legs which could crack off under pressure. I also feel glass hardness/stress is affected by age and curvature, I've nothing difinitve, just my experience.
My advice to you would be to make sure you see all the visible legs flexing(from the outside of the glass) before you start to repair. This should ensure a) good access for the resin and b) show up any hidden legs which could crack off under pressure. I also feel glass hardness/stress is affected by age and curvature, I've nothing difinitve, just my experience.
Is a customer always right? - No, but they are always the customer.
Who is online
Users browsing this forum: No registered users and 33 guests