resin repair demo

Dave M · Post by **Dave M** » March 20th, 2008, 7:23 pm

Received an email the other day regarding {Name or product removed upon request from manufacturer} resin and a link to some demo videos. Has anyone seen them? Pay attention to the outside repair video and how the tech utilizes the hood cover! Here is the link......{Link removed at the request of the manufacturer}

screenman · Post by **screenman** » March 20th, 2008, 11:49 pm

I have tried this resin and found it harder to work with than the Magnibond I use at the moment. I would suggest they certainly need to improve their pit fill resin. I would hate if my pit's ended up looking like the one at the beginning of the video. Very impressive video collection though.

screenman · Post by **screenman** » March 21st, 2008, 12:01 am

I just looked at that video again, why on earth did he drill that job, the legs were massively connected. Just a good clean with a scribe or just a light grind with the drill. Another guy that does not know what he is doing or why selling windshield repair techniques, just what we do not need.

splitpit · Post by **splitpit** » March 21st, 2008, 5:09 am

I think their videos are really to promote the resin and not so much to train on wsr tecniques. I agree that there was no need to drill but not everyone does things the same. I'm sure that in most cases, one tech could watch another tech do a repair and probably find fault with something they do differently. But there's no need to knock what someone else does....just do things the way that works best for you.

screenman · Post by **screenman** » March 21st, 2008, 5:24 am

That video was showing how to do repairs outside, as such I see it as an instructional video. If there resin is that super good why do they drill? I will answer that question for you, in my opinion they do not know what they are doing. If they wish to contact me I will explain why there is no reason to drill a repair like that.

jayjacque · Post by **jayjacque** » March 21st, 2008, 7:17 am

I'll have to go back into my mail. I thought there was only one video, the one where a couple guys glue back a glass table using {name removed at the request of the manufacturer}. They were soooooooo careful, it was like they were walking on glass! (pun intended). I agree screenman, I dont care for their pit resin, but still like very much their regular resin. Have been getting good results as long as I use delta for the pits

Windshield Repair Forum