dry out
-
- Junior Member
- Posts: 91
- Joined: December 1st, 2005, 1:53 pm
- Enter the middle number please (3): 5
- Location: North Texas
Re: dry out
On a serious note do repair techs that use the moisture evaporator ever get a chance to inspect a repair weeks or months after having dried out and repaired a break? If so is there any notable difference in its appearence than when a break that had no moisture problem has been inspected weeks or months later?
-
- Senior Member
- Posts: 648
- Joined: August 9th, 2003, 6:13 am
- Enter the middle number please (3): 5
- Location: Westbrook, ME
Re: dry out
Wow, you guys are gullible! Just goes to show you how easy it may be to follow instructions from a post even though you know something just does not sound right!
Good one, Screenman!
Good one, Screenman!
-
- Senior Member
- Posts: 3192
- Joined: February 25th, 2004, 1:44 pm
- Enter the middle number please (3): 5
- Location: uk Lincolnshire
Re: dry out
I get to see most of my repairs at a later date and I can see no difference between those we dried out and those we did not need too. However the latter are far and few between.
Glad we got a few smiles.
Glad we got a few smiles.
33,000 + screen repairs over 18 years and still learning.
Over
Over
-
- Member
- Posts: 380
- Joined: March 7th, 2006, 12:41 pm
- Enter the middle number please (3): 5
- Location: England, Staffordshire
- Brent Deines
- Moderator
- Posts: 2452
- Joined: September 24th, 2003, 7:54 am
- Enter the middle number please (3): 5
- Location: Eugene, OR
- Contact:
Re: dry out
It's not like we don't hear some things just as wacky here on the windshield repair forum from time to time. I must admit I do feel a bit silly about my reply though.Dave M;29769 wrote:Wow, you guys are gullible! Just goes to show you how easy it may be to follow instructions from a post even though you know something just does not sound right!
Good one, Screenman!
Brent Deines
Delta Kits, Inc.

Delta Kits, Inc.

Re: dry out
The problem is Screenman that one time I doubted the importance of drying out every repair(you set me straight) LOL so when I saw this I thought this is crazy!! But its from Screenman so I want to see where this go's LOL. You know?? I am visializing some poor guy tapping on the window while you heat it with torch LOL and I am thinking this "Bloody" guy is so dedicated its F#$%ing crazy !!!at least I held my tongue LOL...............it was hard to do
-
- Member
- Posts: 476
- Joined: December 3rd, 2003, 1:00 pm
- Enter the middle number please (3): 5
- Location: Panama City Beach, Florida
Re: dry out
Well I just checked and it was Rap a fools day when I first responded. (thought I found a loop hole for a minute there!!)
Best rap a fools joke today!!! Thx, Screenman!
Heh.
Best rap a fools joke today!!! Thx, Screenman!
Heh.
My best mentor one said " be fair with your priceing but never too low, be honest with your customer/competition, when the day is done be sure you have done "good works", and always leave something of value on the barganing table!!
While my friend and trainer/ mentor Ray has moved on, his words live.
While my friend and trainer/ mentor Ray has moved on, his words live.
Who is online
Users browsing this forum: Bing [Bot] and 3 guests