Make a crack
-
- Senior Member
- Posts: 1951
- Joined: November 12th, 2003, 6:11 pm
- Enter the middle number please (3): 5
- Location: Southern California
Make a crack
Baseball Bat? Shotgun?




-
- Member
- Posts: 101
- Joined: August 29th, 2003, 2:42 am
- Enter the middle number please (3): 5
- Location: North Canton, Ohio
- Contact:
-
- Senior Member
- Posts: 1951
- Joined: November 12th, 2003, 6:11 pm
- Enter the middle number please (3): 5
- Location: Southern California
billing
Read autocosmetics' post.
Any star or combo that results from his suggestions can then be turned into a crack(s) by rapping the w/s from the inside with the side of your fist. Rap too hard and you'll split the entire w/s.
You can also pick up practice windshields in the dumpsters behind replacement shops.
Any star or combo that results from his suggestions can then be turned into a crack(s) by rapping the w/s from the inside with the side of your fist. Rap too hard and you'll split the entire w/s.
You can also pick up practice windshields in the dumpsters behind replacement shops.
cracks
All you need is a ball bearing or marble with a hole big enough for a rubber band. Slide you rubber band through the hole, hold on with your fingers (slingshot) draw back on the ball bearing and you got yourself a break to work on.crackup wrote:Does anyone have a good method to make windshield breaks to practice on?
-
- Senior Member
- Posts: 796
- Joined: August 24th, 2003, 12:00 pm
- Enter the middle number please (3): 5
- Location: San Jose California
Who is online
Users browsing this forum: No registered users and 53 guests