removing pit resin
-
- Junior Member
- Posts: 11
- Joined: March 1st, 2011, 10:22 am
- Enter the middle number please (3): 3
- Contact:
removing pit resin
ok so after a great day in eugene it warmed up enough for me to get out and practice on one of our Yukon vehicle (all yukon vehicles are great test sites pick a problem we have them) I seem to be having difficullty getting the pit resin of after curing
-
- Member
- Posts: 133
- Joined: February 23rd, 2010, 2:26 pm
- Enter the middle number please (3): 3
- Contact:
Re: removing pit resin
Simply hold your single edge razor @ 90 degrees and shave from side to side in different directions, clean, and polish. Call Korey-the man knows this business,plus he's from metro Atlanta-Tucker, Ga!!! Good guy.
-
- Junior Member
- Posts: 11
- Joined: March 1st, 2011, 10:22 am
- Enter the middle number please (3): 3
- Contact:
Re: removing pit resin
thats what i have been doing however there still seems to a be a film left
-
- Senior Member
- Posts: 3192
- Joined: February 25th, 2004, 1:44 pm
- Enter the middle number please (3): 5
- Location: uk Lincolnshire
- Contact:
Re: removing pit resin
Maybe you are using more pitfill than you need, scrape until flat. It may take a while at first but with practise you should speed up. Tighten your grip on the blade to allow less flex, practise on your practise screen.
-
- Junior Member
- Posts: 11
- Joined: March 1st, 2011, 10:22 am
- Enter the middle number please (3): 3
- Contact:
Re: removing pit resin
perhpsits a temp athing is that possible
-
- Junior Member
- Posts: 11
- Joined: March 1st, 2011, 10:22 am
- Enter the middle number please (3): 3
- Contact:
Re: removing pit resin
things to practice on arent a problem I live in the yukon where all windshields have chips or cracks there are three good specimiens in my laneway
-
- Member
- Posts: 344
- Joined: October 22nd, 2010, 11:38 am
- Enter the middle number please (3): 3
- Contact:
Re: removing pit resin
Please explain further as to what your seeing. When you say a film is present, is that film only visible over the small pit that was filled or larger than that? If it's larger, your not scrapping properly. Also, if your using the same blade for multiple repairs they become dull quickly. I change razor blades every other repair.yukonglass wrote:things to practice on arent a problem I live in the yukon where all windshields have chips or cracks there are three good specimiens in my laneway
-
- Junior Member
- Posts: 11
- Joined: March 1st, 2011, 10:22 am
- Enter the middle number please (3): 3
- Contact:
Re: removing pit resin
i am using new blades scrapping at 90 deg trying to keep the blade stiff and just can 't elminte the last of the pit resin it feels smooth but thereis an opaque film
- Brent Deines
- Moderator
- Posts: 2449
- Joined: September 24th, 2003, 7:54 am
- Enter the middle number please (3): 5
- Location: Eugene, OR
- Contact:
Re: removing pit resin
Are you talking about in the pit area? If so, that is not going to go away. Polishing will help hide it, but it will always look slightly different than the glass around it, kind of like a water spot.
To keep it as smooth as possible be sure to use long strokes so your blade never stops on the resin. That will help the finished repair as good as it gets.
Just for fun, cure a drop of pit resin on the glass (not on a repair) and scrape it off using the same technique you are using now. Does it all scrape off? If so, you are probably concerned over nothing. If not, let us know and we'll throw out a couple more ideas.
To keep it as smooth as possible be sure to use long strokes so your blade never stops on the resin. That will help the finished repair as good as it gets.
Just for fun, cure a drop of pit resin on the glass (not on a repair) and scrape it off using the same technique you are using now. Does it all scrape off? If so, you are probably concerned over nothing. If not, let us know and we'll throw out a couple more ideas.
Brent Deines
Delta Kits, Inc.
Delta Kits, Inc.
Who is online
Users browsing this forum: Bing [Bot] and 5 guests