Laminated Glass question.

Post your windshield repair tips, questions, advice! Note there is a sub-forum specifically for business development questions.
Post Reply
Jimmy Prince

Laminated Glass question.

Post by Jimmy Prince »

I called a glass place today to get a 12x12 piece of laminated glass. 6 bucks. will this work to practice fixing chips on?
User avatar
benswindshieldrepair
Member
Posts: 178
Joined: March 19th, 2011, 8:01 pm
Enter the middle number please (3): 3
Location: Flathead Lake, Montana

Re: Laminated Glass question.

Post by benswindshieldrepair »

Laminated Glass is laminated glass as far as I know, so yes!
User avatar
Brent Deines
Moderator
Posts: 2452
Joined: September 24th, 2003, 7:54 am
Enter the middle number please (3): 5
Location: Eugene, OR
Contact:

Re: Laminated Glass question.

Post by Brent Deines »

You can specify AS-1 if you want windshield glass, but for practice AS-2 will work just fine and is sometimes easier to create damage in. If you can, get a piece of AS-1 with the shade band so you can practice repairs in the shaded area as well, or just get a windshield from a wrecking yard. 12 x12 seems a bit small. I recommend at least 20 x 20.
Brent Deines
Delta Kits, Inc.
Image
SMITHY
Member
Posts: 116
Joined: May 2nd, 2011, 6:26 am
Enter the middle number please (3): 3

Re: Laminated Glass question.

Post by SMITHY »

Jimmy Prince wrote:I called a glass place today to get a 12x12 piece of laminated glass. 6 bucks. will this work to practice fixing chips on?
Hey Jimmy,

I called one of my future competitors here who do replacment and repairs and asked them if I could have an old windshield they just removed.
They could not believe the question, but were more than happy to give me one. It was cracked across the whole center of it, but plenty of space left on it to make bullseyes, star breaks and I even got some great flower breaks on it too.

In fact the guy being mobile was in my neighborhood and met me two blocks from my house. Plus, it cost me nothing!
Image
Jeff Smith-Owner
A + Windshield Repair
Jimmy Prince

Re: Laminated Glass question.

Post by Jimmy Prince »

How do i make the bulls eyes and star chips on the windshield?
SMITHY
Member
Posts: 116
Joined: May 2nd, 2011, 6:26 am
Enter the middle number please (3): 3

Re: Laminated Glass question.

Post by SMITHY »

Jimmy Prince wrote:How do i make the bulls eyes and star chips on the windshield?
There are bullseye and star maker tools that come with your kit.
Image
Jeff Smith-Owner
A + Windshield Repair
User avatar
Brent Deines
Moderator
Posts: 2452
Joined: September 24th, 2003, 7:54 am
Enter the middle number please (3): 5
Location: Eugene, OR
Contact:

Re: Laminated Glass question.

Post by Brent Deines »

We use a hook tool for bullseyes, spring loaded center punch for star breaks, hardened steel bearing with a hole through it on a rubber band for combo breaks. If you have an old file you don't need you can break it and sharpen points of different sizes and shapes to make all kinds of different breaks. None of these methods work the way you want them to 100% of the time, but since you will be repairing damage that comes in all shapes and sizes that is just fine.
Brent Deines
Delta Kits, Inc.
Image
screenman
Senior Member
Posts: 3192
Joined: February 25th, 2004, 1:44 pm
Enter the middle number please (3): 5
Location: uk Lincolnshire

Re: Laminated Glass question.

Post by screenman »

I like my trainee's to do 100 repairs before going out and charging for the work, I suggest a much larger piece of laminate is needed. I never have a problem getting an old windshield as other wise the replacement companies have to pay to have them taken away.
Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests