Safelite primer question.

Post your windshield repair tips, questions, advice! Note there is a sub-forum specifically for business development questions.
Dempsterglass
Junior Member
Posts: 37
Joined: August 25th, 2014, 9:11 pm
Enter the middle number please (3): 3
Location: Flathead Valley,MT
Has thanked: 3 times
Been thanked: 10 times
Contact:

Re: Safelite primer question.

Post by Dempsterglass » June 27th, 2015, 9:00 am

I was a store manager of multiple Safelite locations in mid 90s.
I could tell you so many stories of how they operate, locally, regionally and call centers.
One thing though is my stores had highest buyout percentage of non SGC glass. Having started in the business working for LOF I was used to premium quality glass. Very rarely would an SGC part go in.
Subsequently I also had lowest warranty ratio, high CSI and profit ratios compared to other stores.

I use denatured alcohol to help soften laminate between glass when cutting flat lami.
You can put it on there but only for a couple seconds before it melts PVB.
I personally won't put it into break for repairs but I will occasionally wipe surface with a lightly dampened cloth to remove RainX type coatings.
These users thanked the author Dempsterglass for the post:
Brent Deines (June 28th, 2015, 2:42 pm)
Rating: 25%

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 2 guests