is it just me:

Post your windshield repair tips, questions, advice! Note there is a sub-forum specifically for business development questions.
Post Reply
ChampionCHIP,wsr
Junior Member
Posts: 75
Joined: August 3rd, 2006, 10:27 am
Enter the middle number please (3): 5
Location: hillsborough, new jersey
Has thanked: 34 times
Been thanked: 2 times

is it just me:

Post by ChampionCHIP,wsr » October 5th, 2015, 12:52 pm

is it just me?
I ordered some supplies last week and when I told bruce when I ordered tabs, that it has been a year or so sonce I orders them.
he seemed surprised that I reuse them, been doing it for years. am I the only one doing this?

User avatar
Brent Deines
Moderator
Posts: 2359
Joined: September 24th, 2003, 7:54 am
Enter the middle number please (3): 5
Location: Eugene, OR
Has thanked: 73 times
Been thanked: 153 times
Contact:

Re: is it just me:

Post by Brent Deines » October 5th, 2015, 3:15 pm

It's illegal in 49 states, I'm surprised you aren't in jail! :)
These users thanked the author Brent Deines for the post (total 2):
ChampionCHIP,wsr (October 6th, 2015, 5:29 am) • screenman (October 8th, 2015, 11:16 am)
Rating: 50%

User avatar
Mr Bill
Senior Member
Posts: 523
Joined: February 9th, 2005, 6:15 pm
Enter the middle number please (3): 5
Location: Santa Cruz CA
Has thanked: 13 times
Been thanked: 47 times

Re: is it just me:

Post by Mr Bill » October 5th, 2015, 6:50 pm

If the cure tab is nice and clean when I remove it from the chip, I put it back in the little tab box for re use.
Those with resin sticking to the tab are separated and later soaked in alcohol and wiped off.
If they become nice and clean, I re use them .
Last time I ordered tabs, I ordered 3 boxes, so I have enough to do me for a while.
The price of the tabs is fair, but the price plus shipping seems more reasonable if UPS brings me 3 boxes at once.

candyman
Senior Member
Posts: 742
Joined: June 16th, 2009, 11:28 pm
Enter the middle number please (3): 3
Location: NC
Has thanked: 10 times
Been thanked: 34 times
Contact:

Re: is it just me:

Post by candyman » October 9th, 2015, 2:54 pm

I reuse them all the time if clean and no bent edges. I use them mostly to cover the small legs on some breaks that protrude past the size of the injector. I will cure them prior to removing the bridge then use pit resin, a fresh tab and cure. I like it better than using the curing tape. I would venture to say, many others do this also. I' ve seen some use plastic wrap and document protectors. I suppose if a product can make the pit resin anarobic it will work.
Image

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 16 guests