Windshield Repair Practice

Post your windshield repair tips, questions, advice! Note there is a sub-forum specifically for business development questions.
Post Reply
FixitFelix
Junior Member
Posts: 15
Joined: May 30th, 2019, 9:17 am
Enter the middle number please (3): 3
Has thanked: 5 times
Been thanked: 1 time

Windshield Repair Practice

Post by FixitFelix » June 4th, 2019, 10:18 am

Guys,

Quick question. Is there much difference between a stock lammy sheet and an actual windshield (besides the curvature)? I ask because i've got plenty of leftover lammy from commercial door repairs, and was wondering if I could use that to practice on, or if I needed to practice primarily on windshields.

Thanks
I'm your huckleberry

Bruce McDonald
Moderator
Posts: 28
Joined: October 21st, 2008, 12:20 pm
Has thanked: 14 times
Been thanked: 3 times

Re: Windshield Repair Practice

Post by Bruce McDonald » June 4th, 2019, 1:46 pm

Windshields are listed as AS1 on the bug, we have used AS2 for practice glass for years. The difference is the thickness of the PVB (laminate). I would try using what you have.
These users thanked the author Bruce McDonald for the post:
FixitFelix (June 5th, 2019, 7:30 am)
Rating: 25%
Bruce McDonald
Delta Kits, Inc.
Image

screenman
Senior Member
Posts: 3174
Joined: February 25th, 2004, 1:44 pm
Enter the middle number please (3): 5
Location: uk Lincolnshire
Has thanked: 70 times
Been thanked: 130 times

Re: Windshield Repair Practice

Post by screenman » June 4th, 2019, 10:44 pm

Can I also add, when practicing it is a good idea make the damage wet before starting the process and also to do a good few outside. The wet gets you used to drying out and the outside gets you used to the idea of direct and indirect uv. Making sure you master these things will make the quality of your repairs far better.
These users thanked the author screenman for the post:
FixitFelix (June 5th, 2019, 7:31 am)
Rating: 25%

FixitFelix
Junior Member
Posts: 15
Joined: May 30th, 2019, 9:17 am
Enter the middle number please (3): 3
Has thanked: 5 times
Been thanked: 1 time

Re: Windshield Repair Practice

Post by FixitFelix » June 5th, 2019, 7:35 am

Bruce McDonald wrote:
June 4th, 2019, 1:46 pm
Windshields are listed as AS1 on the bug, we have used AS2 for practice glass for years. The difference is the thickness of the PVB (laminate). I would try using what you have.
Thanks for that Bruce!
screenman wrote:
June 4th, 2019, 10:44 pm
Can I also add, when practicing it is a good idea make the damage wet before starting the process and also to do a good few outside. The wet gets you used to drying out and the outside gets you used to the idea of direct and indirect uv. Making sure you master these things will make the quality of your repairs far better.
Thanks for the advice! I honestly hadnt thought about doing that, but now that you mention it that's definitely preparation to what would seem to be a fairly common scenario. I'm just trying to set my staging/practice area to throw at me the most common scenario's i'll be experiencing so i'm not surprised when im in the field.
These users thanked the author FixitFelix for the post:
screenman (June 18th, 2019, 2:36 am)
Rating: 25%
I'm your huckleberry

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 7 guests