WSR speed

Post your windshield repair tips, questions, advice! Note there is a sub-forum specifically for business development questions.
mafsu

Re: WSR speed

Post by mafsu »

Good post Starquest. I also probe my repairs to decrease the time it take them to fill. I also agree that changing equipment will likely not speed up the process enough to make a truly noticeable difference.
Sneck

Re: WSR speed

Post by Sneck »

About changing equipment...

In my own personal experience, when I switched to Delta, my star breaks actually filled completely everytime. I feel great about the service I am performing and the excellent results Delta equipment has given me. My old equipment worked, but honestly, I never achieved a PERFECT star break repair consistently until I switched to Delta.

Sneck
StarQuest

Re: WSR speed

Post by StarQuest »

From my testing results Delta's bridges performed as good or equal too what I'm currently using. If I wasn't part of a franchise and had my choice to choose? I'd put them at the top of my list. When it comes to service.....Delta has been one of the best. These people really work hard to obtain your business! I personally admire that;)
Jeremiahswindshieldrepair

Re: WSR speed

Post by Jeremiahswindshieldrepair »

I can run 7 Delta bridges at one time without having to manipulate crazy small parts or worry about external vaccuum. The chips are 3/4 done by the time I set the 7th bridge and i still do a fantastic repair.... show me another system that can do that. Oh and like Mafsu said ... get quality down then speed comes later. I have the quality down and can do most repairs (90%) in 10 minutes or under.
mafsu

Re: WSR speed

Post by mafsu »

Before anyone goes out and buys 7 bridges, I think that's overkill. I carry three bridges and 80% of the time when the third bridge is set the first repair is ready for curing.
Jeremiahswindshieldrepair

Re: WSR speed

Post by Jeremiahswindshieldrepair »

Granted not many people do it that way ... but I carry a minimum of 4 bridges at a time. Many cars I do have 4 chips on them, not including the other cars that might be at the same location that need done. I usually only break into my 5th-7th bridge when doing large fleet account and not on really sunny days where it will cure too fast or where I need to manually manipulate it a bit. But many days I found myself breaking out the extras.
Dave M
Senior Member
Posts: 648
Joined: August 9th, 2003, 6:13 am
Enter the middle number please (3): 5
Location: Westbrook, ME

Re: WSR speed

Post by Dave M »

I'm happy to read that you are back in the repair business!
Jeremiahswindshieldrepair

Re: WSR speed

Post by Jeremiahswindshieldrepair »

Thanks Dave.
Post Reply

Who is online

Users browsing this forum: No registered users and 45 guests