Resins??

[Anonymous]

Glassdoc,

As I have posted for you other times. Please take a moment and read through the other posts and become informed before you post some of your comments. I think you might be losing sight of the purpose for a forum by taking this personal now. If you read them, you might realize I do try to present solutions and extract possible solutions by asking questions from all to problems that needs them. That is called being proactive my friend.

You are missing what this friendly debate was all about. It was not about a personal attack on any one resin or opinion. It was about getting as much information as possible written and opinion to make the most informative decision and if the information was not available, to ask the question... why?

If you don't feel that this step in the decision process is necessary, then so be it. Thats your prerogative. Maybe others do now because of these posts.

And yes, I have contacted other suppliers for this info. Some supplied it and some did not at the time I made my decision and if you read you will see it posted.

Glassdoc, for someone who told me more or less they did not want to debate you sure are doing a good job of it. So once again I ask you, please read some posts and make a more informed post when commenting about me, sir.

Pay it foward,

Brian
www.safeglasstechnologies.com

[email]"info@safeglasstechnologies.com"[/email][/email]

[Anonymous]

I am not debating. I merely ask you a direct question based on the already beat to death posts regarding tech specs. The question, since you STILL have not answered it, is; What resin are you currently using, and can you post the "tech-specs" for that particular resin, so that the rest of us mis-informed repair techs can see what it is that we have overlooked doing the trial and error method? Thats all. No more info or retoric needed.. Basically (tech-spec) speaking.. Put up, or shut up.. Not to sound defensive, but if your going to preach, then give us a scripture so we can follow along..

[Anonymous]

Glassdoc,

Once again read, read, read, read and read. Your question was answered long before this debate even started and I just spelled that out in the last post. Oh you did'nt read it...maybe you did'nt understand it becuase you have taken this personal and can't focus on anything but fireing back with an unloaded weapon. It's in here. I am really tired of sounding like a broken record. Read and become informed before you post about me or anyone else in the future so you don't continue shooting yourself in the foot.

I am done with you until something good can be obtained from your posts.

Pay it foward,

Brian
www.safeglasstechnologies.com

[email]"info@safeglasstechnologies.com"[/email][/email]

[Anonymous]

Whatever... Should have figured on not being able to get an answer from the man who asks all the questions. By the way, the question I posted is current within the last 48 hours.. When and if I decide to read thru the archive selection, I may run across your answer.. You spent 5 minutes firing back a response that you could have spent 2 answering a question.. Who sounds defensive..

[Anonymous]

I think many valid points have been made on this subject, but frankly don

[Anonymous]

Brent and all who post,

I want to say I am sorry for getting side tracked negatively in anyway. That was never my intention. I just wanted to put an end to it.

I also want to say thanks for being the mediator Brent, your post was exactly what I was trying to bring out.

Thank you,


Pay it foward,

Brian
www.safeglasstechnologies.com

[email]"info@safeglasstechnologies.com"[/email][/email]