Safe and Sound Glass

Post your windshield repair tips, questions, advice! Note there is a sub-forum specifically for business development questions.
User avatar
Brent Deines
Moderator
Posts: 2452
Joined: September 24th, 2003, 7:54 am
Enter the middle number please (3): 5
Location: Eugene, OR
Contact:

Safe and Sound Glass

Post by Brent Deines »

It sounds like laminated side glass will become more main stream very soon. It will be interesting to see how well it holds up in side lite applications. So far there just hasn't been enough of it on the market to know if it will offer much of a benefit to windshield repair technicians, but if it is going in inexpensive cars like the Malibu we should know before too long.

http://www.prnewswire.com/cgi-bin/stori ... 0615&EDATE
Brent Deines
Delta Kits, Inc.
Image
starstruck

Re: Safe and Sound Glass

Post by starstruck »

I hope they all end up going that route. It only makes sense. And I think it will be a benefit to those of us who do wsr!
Glasseye
Member
Posts: 380
Joined: March 7th, 2006, 12:41 pm
Enter the middle number please (3): 5
Location: England, Staffordshire

Re: Safe and Sound Glass

Post by Glasseye »

From what Iv'e read up on this, as well as being laminated, the glass is also semi-toughened. Has any one repaired one of these glasses yet and does the toughening affect the repair in any way?.
Is a customer always right? - No, but they are always the customer.
User avatar
Brent Deines
Moderator
Posts: 2452
Joined: September 24th, 2003, 7:54 am
Enter the middle number please (3): 5
Location: Eugene, OR
Contact:

Re: Safe and Sound Glass

Post by Brent Deines »

I thought I had read about that as well but couldn't find any detailed information so far and haven't had time to talk to the manufacturers to get the scoop.
Brent Deines
Delta Kits, Inc.
Image
Nomad
Member
Posts: 283
Joined: December 11th, 2004, 3:13 pm
Enter the middle number please (3): 5
Location: Yuma Arizona
Contact:

Re: Safe and Sound Glass

Post by Nomad »

All I know is that a guy I know has installed some of these and said that most of the time it is totally split out and unrepairable immediately after being hit. Haven't heard anything more than that.
Glasseye
Member
Posts: 380
Joined: March 7th, 2006, 12:41 pm
Enter the middle number please (3): 5
Location: England, Staffordshire

Re: Safe and Sound Glass

Post by Glasseye »

This link provides the information on laminated side glass

http://www.pilkington.com/About+Pilking ... lights.htm
Is a customer always right? - No, but they are always the customer.
StarQuest

Re: Safe and Sound Glass

Post by StarQuest »

I have 2 of them from a glass shop buddy of mine (for practice pieces) They were both cracked and not chipped. He stated somebody tried breaking into vehicle not aware side glass was laminated. Not sure if laminated side glass will bring in much work for us, unless it gets hit from a stone that a lawn mower thrown.

Still not sure about providing any long crack repairs on these. A windshield is glued in stationary while side glass is not.
ghost rider
Member
Posts: 171
Joined: April 16th, 2008, 5:04 am
Enter the middle number please (3): 5
Location: Iowa

Re: Safe and Sound Glass

Post by ghost rider »

HI, first time poster here. have been watching in the background for a while, thought i would jump in. i had two failed repairs last year and one already this year, al three on acoustic shields in Denali's. there may be something to the hardening theory. any thoughts?
starstruck

Re: Safe and Sound Glass

Post by starstruck »

Who knows? Could be a coincidence or..........? I guess only time will tell but if stats prove over time that there is a direct connection between failed repairs and that type of glass then I won't be accepting jobs on vehicles that are equipped with it. No point in working on something that is destined to fail. I wouldn't want to waste my time or tarnish my business image with failed repairs.
ghost rider
Member
Posts: 171
Joined: April 16th, 2008, 5:04 am
Enter the middle number please (3): 5
Location: Iowa

Re: Safe and Sound Glass

Post by ghost rider »

I have repaired many lam sidelites and sunroofs. they are not new. almost all cars back in the 30's and 40's had lam lites. chev suburban had lam sidelites until late 70's or early 80's. you might be surprised how many you will be asked to repair if we get the word out that they are repairable. I have done long cracks on sunroofs, sidelites should have less stress than a glued down shield. I think long cracks should repair very nicely
Post Reply

Who is online

Users browsing this forum: No registered users and 37 guests