Why you need Deltas Plate Glass resin

[GlassStarz]

A while back I bought some of Deltas Plate Glass resin I had a customer with a couple bullet holes in thier store front it worked great I ended up with about half a bottle left and put in the box
Several times since then have been happy that it was there
1st I had a big ugly bull with a huge piece missing told the customer it was really too big but they were short on cash and didnt care how it looked just didnt want to pay for a replacement I took the plate glass and put it on the major divot and applied a cure tab I chose the plate glass because it is super thick and wouldnt run into the break possibly plugging things up once it was cured I drilled a hole and repaired as usual worked perfect

2nd Similar break to the 1st one but lots of open crack which experience old me resin would seep out of again it was a can you keep me from cracking out situation and final apearence wasnt as important I filled the injector with the thick stuff and applied pressure rather than run out like the regular resin would do it was to thick to run out 75% of the cracks and I allied a cure tab over the couple places where it did took about twice as long to fill but final product looked like a regular bull repair once again that little bottle I tend to forget about was there

For those who want to fix the BB holes in store fronts give it a try follow the instructions they send you and be surprised