my first job.
Posted: September 2nd, 2012, 11:44 pm
just wanted to say hay and show off my first job. also to say thanks to Delta and the training they have offered me, it was great and i highly recommend it to every that can make it. lucky for me i am only an hr. away...
Anyway the 2003 Mini Cooper has has some clear or a really really bad restoration at some point as it looked like and felt like the clear coat or UV coating was pored on. It had hi and low spots every where. below is a before and after as well as the first little bit of sanding to show all the hi and lows... sorry i for got to get a before of the driver side but as you can see from the passenger side they where bad and took 1 hr each to complete... also had to go from 320 down to 180 to start
driver side
first start of sanding. you can see the hi and lows from a poorly applied coating of clear or UV and was way to thick.
Anyway the 2003 Mini Cooper has has some clear or a really really bad restoration at some point as it looked like and felt like the clear coat or UV coating was pored on. It had hi and low spots every where. below is a before and after as well as the first little bit of sanding to show all the hi and lows... sorry i for got to get a before of the driver side but as you can see from the passenger side they where bad and took 1 hr each to complete... also had to go from 320 down to 180 to start
driver side
first start of sanding. you can see the hi and lows from a poorly applied coating of clear or UV and was way to thick.