Glass Replacement Equipment

Got something to sell? Post it here!
Post Reply
jhickman1
Member
Posts: 107
Joined: January 11th, 2012, 1:37 pm
Enter the middle number please (3): 3
Location: Fayetteville, NC
Has thanked: 2 times
Been thanked: 4 times
Contact:

Glass Replacement Equipment

Post by jhickman1 » December 29th, 2012, 12:06 pm

I am selling a complete set of auto glass replacement equipment. Most is Equalizer brand and has only been used three or four times!! Cold Knives, Long Knife, Spare Blades, Screwdriver and Ratchet Sets, Glass Stand, Rearview Mirror Tools, Scraper Kit, Urthane and Primer, Dewalt Caulk Gun and Vac, etc. I know I didn't list everything but if you PM with your email and what you are interested in I can send you a complete list and pictures if you want them. I didnt put a price on here as I would consider selling separately but, I would prefer to sell it all as a complete set. Thanks for looking -Justin
J. Hickman
Liberty Auto Glass
Fayetteville, NC

recboy2000
Junior Member
Posts: 5
Joined: September 16th, 2012, 10:35 pm
Enter the middle number please (3): 3
Has thanked: 1 time
Been thanked: 0

Re: Glass Replacement Equipment

Post by recboy2000 » January 16th, 2013, 8:35 pm

How much are you asking for all ?

jhickman1
Member
Posts: 107
Joined: January 11th, 2012, 1:37 pm
Enter the middle number please (3): 3
Location: Fayetteville, NC
Has thanked: 2 times
Been thanked: 4 times
Contact:

Re: Glass Replacement Equipment

Post by jhickman1 » January 18th, 2013, 6:08 pm

Im asking $900 . Ive got over $1000 in it all. I can send a whole list of the equipment if you are interested. Alot of the tools were never used and a few were used 2 or 3 times. I would say all are "New" or "Like-New" condition!
J. Hickman
Liberty Auto Glass
Fayetteville, NC

DavidB
Junior Member
Posts: 11
Joined: January 5th, 2013, 1:56 pm
Enter the middle number please (3): 3
Has thanked: 11 times
Been thanked: 2 times

Re: Glass Replacement Equipment

Post by DavidB » January 19th, 2013, 1:05 pm

Just curious....I've read alot of posts where guys say once they begin their WSR business, they begin to get alot of requests for replacement, when they only do repairs. Therefore that's why they get into doing replacements. I myself only do repairs for now, but was curious as to why you're selling. Are you getting out of the business, found better equipment, or maybe found replacement just wasn't the route you wanted to go?
I don't know much about replacement but have thought about adding it down the line, so that's why I ask.

Thanks,
DavidB

jhickman1
Member
Posts: 107
Joined: January 11th, 2012, 1:37 pm
Enter the middle number please (3): 3
Location: Fayetteville, NC
Has thanked: 2 times
Been thanked: 4 times
Contact:

Re: Glass Replacement Equipment

Post by jhickman1 » January 20th, 2013, 8:44 pm

DavidB wrote:Just curious....I've read alot of posts where guys say once they begin their WSR business, they begin to get alot of requests for replacement, when they only do repairs. Therefore that's why they get into doing replacements. I myself only do repairs for now, but was curious as to why you're selling. Are you getting out of the business, found better equipment, or maybe found replacement just wasn't the route you wanted to go?
I don't know much about replacement but have thought about adding it down the line, so that's why I ask.

Thanks,
DavidB
I am dropping the replacement portion of the business. This area is saturated with replacement shops. Some of those shops are content to replace a glass for pennies. I got tired of the hassle and competition. There is plenty of money to be made in doing replacements. When I was making money, I was making good money! But, you gotta know when to hold em, and know when to fold em. A different location, and I might still be in business. For now I just thnk I will go back to WSR.
J. Hickman
Liberty Auto Glass
Fayetteville, NC

eddieburroughs
Junior Member
Posts: 3
Joined: February 25th, 2011, 6:07 pm
Enter the middle number please (3): 3
Location: Raleigh, NC
Has thanked: 2 times
Been thanked: 0
Contact:

Re: Glass Replacement Equipment

Post by eddieburroughs » January 21st, 2013, 11:17 am

Can you give a list of equipment you are selling.

I am in Raleigh and if this is something I need I can swing down.

Thanks
Eddie

jhickman1
Member
Posts: 107
Joined: January 11th, 2012, 1:37 pm
Enter the middle number please (3): 3
Location: Fayetteville, NC
Has thanked: 2 times
Been thanked: 4 times
Contact:

Re: Glass Replacement Equipment

Post by jhickman1 » January 21st, 2013, 2:19 pm

eddieburroughs wrote:Can you give a list of equipment you are selling.

I am in Raleigh and if this is something I need I can swing down.

Thanks
Eddie
OK I will PM the list to you.

By the way, for everyone else on here I AM SELLING THE DEWALT EQUIPMENT SEPARATE NOW. I will now be asking $600 for the rest of the equipment.
J. Hickman
Liberty Auto Glass
Fayetteville, NC

jhickman1
Member
Posts: 107
Joined: January 11th, 2012, 1:37 pm
Enter the middle number please (3): 3
Location: Fayetteville, NC
Has thanked: 2 times
Been thanked: 4 times
Contact:

Re: Glass Replacement Equipment

Post by jhickman1 » February 3rd, 2013, 11:56 am

I am lowering the price to $500 now for the replacement equipment. I still have the Dewalt tools as well and I could negotiate on that too. If you are interested, let me know and we can try to work something out.
J. Hickman
Liberty Auto Glass
Fayetteville, NC

jhickman1
Member
Posts: 107
Joined: January 11th, 2012, 1:37 pm
Enter the middle number please (3): 3
Location: Fayetteville, NC
Has thanked: 2 times
Been thanked: 4 times
Contact:

Re: Glass Replacement Equipment

Post by jhickman1 » February 16th, 2013, 8:15 pm

Here is the complete list of what I have for sale. I'm asking $500 or shoot me an offer.

**Super Scraper Kit(pinchweld scraper) it comes with the handle, 30 blades(1/2, 5/8, 3/4 inch wide), and the hard case. A couple blades were used but probably not too dull.
**Breakaway Rearview Mirror Removal Tool
**Rearview Mirror Installer (Vice-Grip Style)
**Door Upholstery Remover
**Windshield Stand (28in. wide, the big one from Equalizer)
**Clip Removal Tool
**Push Button Release Cold Knife
**Z-Blade Variety Pack (It had one of each of the 9 Equalizer Z-Blades for the Cold Knife)
**Heavy Duty 3 Drawer Tool Box from Equalizer
**Door Panel Clip Removal Tool
**29 Piece Screwdriver Set (in Hard Case)
**Rubber Gasket Cleaner Tool
**Installation Stick
**Rope Insert Tool (with rope)
**Rubber Hook Tool
**Equalizer Prep Tool
**Wide Pinchweld Prep Tool (changeable razor blade style)
**Swivel Open Utility Knife
**Cold Knife with Red Cover and "1 Blade
**Door Handle Clip Removal Tool
**Deluxe Wiper Arm Puller Tool
**Windshiel Locking Strip Tool
**18 inch Long Knife
**Moulding Release Tool
**41 piece Professional Technician Socket Set (in hard case)

**8 Tubes (10 ounce) Dow U-400 Betaseal Urethane
**9 Dow Single Application Urethane Primers
J. Hickman
Liberty Auto Glass
Fayetteville, NC

jhickman1
Member
Posts: 107
Joined: January 11th, 2012, 1:37 pm
Enter the middle number please (3): 3
Location: Fayetteville, NC
Has thanked: 2 times
Been thanked: 4 times
Contact:

Re: Glass Replacement Equipment

Post by jhickman1 » February 27th, 2013, 8:36 pm

***SOLD***SOLD***SOLD***
J. Hickman
Liberty Auto Glass
Fayetteville, NC

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest