OEM vs OEE Glass
- Brent Deines
- Moderator
- Posts: 2452
- Joined: September 24th, 2003, 7:54 am
- Enter the middle number please (3): 5
- Location: Eugene, OR
- Contact:
OEM vs OEE Glass
Just read an interesting article about OEM vs OEE Glass. I know there have been discussions on this board about distortions within OEM and OEE or ARG glass in the past and this article addresses some of those questions. http://techfeatured.com/automotive/1164 ... auto-glass
Brent Deines
Delta Kits, Inc.

Delta Kits, Inc.

-
- Member
- Posts: 380
- Joined: March 7th, 2006, 12:41 pm
- Enter the middle number please (3): 5
- Location: England, Staffordshire
Re: OEM vs OEE Glass
Interesting article Brent but a little misleading in some places. OEM manufacturers will produce the glass that goes into the car on the production line and they will also produce glass for the ARG market. During the inspection stage of manufacture they will make sure that the highest quality glass will be sent for the production line, any glass that is less perfect but is still within tolerances will be sent to the ARG market. Once the vehicle model ceases production the glass maker will still produce the glass on reducing runs until the demand for the glass makes it no longer financially viable to set up a production run.
Who is online
Users browsing this forum: No registered users and 19 guests