Verticle Glass Repair
-
- Member
- Posts: 410
- Joined: December 23rd, 2004, 9:56 am
- Enter the middle number please (3): 5
- Location: Frankston, TX (East TX)
Verticle Glass Repair
There are previous threads regarding tips for repairing verticle glass but I ran up against one this weekend that I couldn't do. A gentleman approached me and said that he had an RV that had a rock chip at the bottom of the window with a 4-5" crack going up. I informed him that I could repair it. Now, I've done repairs on Hummers and Jeep Wranglers, and had done a repair on an RV the previous day. All had almost verticle glass. But this particular RV had VERTICLE glass - no slant at all (Winnebago Journey). My injector (Delta) was parallel to the ground. Since there was a crack above the chip, I couldn't mount the bridge above or below the chip and "play" with the adjusters. I asked the owner to lower the back chassis levelers and raise the front ones. This didn't improve the angle enough. I tried syringes with Delta's Premium and Magnabond resins. Each time I loaded the injector, resin would run out the mouth. I finally gave up and apologized.
Guess I need to find another type injector. Any comments???
Dale...
Guess I need to find another type injector. Any comments???
Dale...
-
- Moderator
- Posts: 1194
- Joined: August 9th, 2003, 4:00 am
- Enter the middle number please (3): 5
- Location: Eugene OR
- Contact:
Re: Verticle Glass Repair
Or you could call for tech support.
Or you could check out the current newsletter that discusses vertical repairs.
http://www.deltakits.com/newsletter/art ... 105-4.html
Or you could check out the current newsletter that discusses vertical repairs.
http://www.deltakits.com/newsletter/art ... 105-4.html
Delta Kits, Inc.
-
- Member
- Posts: 476
- Joined: December 3rd, 2003, 1:00 pm
- Enter the middle number please (3): 5
- Location: Panama City Beach, Florida
Re: Verticle Glass Repair
You should be able to repair as if it were a little sloped using a syringe and then just be patient. Don
My best mentor one said " be fair with your priceing but never too low, be honest with your customer/competition, when the day is done be sure you have done "good works", and always leave something of value on the barganing table!!
While my friend and trainer/ mentor Ray has moved on, his words live.
While my friend and trainer/ mentor Ray has moved on, his words live.
-
- Moderator
- Posts: 1194
- Joined: August 9th, 2003, 4:00 am
- Enter the middle number please (3): 5
- Location: Eugene OR
- Contact:
Re: Verticle Glass Repair
Jeff is always right. Matt is only right when he agrees with Jeff.maxryde wrote:Except of coarse when it comes from Matt or Jeff and they are ALLWAYS right!!!

Delta Kits, Inc.
Re: Verticle Glass Repair
Hmm ... methinks that spouse O' Jeff would have the final say on this issue:)Delta Kits wrote:Jeff is always right.
Re: Verticle Glass Repair
HAHAHAHA...I take it Matt wont read this thread! LOL. But seriously, I hope to learn verticle repairs also when i have more experience. Thanks for the info on how to do it.
-
- Moderator
- Posts: 1194
- Joined: August 9th, 2003, 4:00 am
- Enter the middle number please (3): 5
- Location: Eugene OR
- Contact:
Re: Verticle Glass Repair
He might read it, but he probably doesn't know how to post!
And Dave, you're right...SHE definitely won't read it, or I uh...would have phrased it differently!



Delta Kits, Inc.
Re: Verticle Glass Repair
I have 3 motorhome dealers, I have never had a problem. I dont use Delta but have another wsr in town that does, he has never had a problem. Did you adjust your bridge?????
Who is online
Users browsing this forum: Bing [Bot], Google [Bot] and 29 guests