gm thick resin
gm thick resin
im in michigan for some reason i have 8 ounces of thick resin from gm what is this resin good for and can u also dilute thick resin with starfill ty for your input
-
- Member
- Posts: 434
- Joined: August 9th, 2003, 3:11 pm
- Enter the middle number please (3): 5
- Location: West Monroe,La.
- Contact:
Re: gm thick resin
You may want to try it in Bullseyes. Nothing with tight legs in it.
Re: gm thick resin
Seems to me that the thick stuff is also recommended for crack work due to its inherant higher strength and closer R.I. to glass when cured.I am having some luck starting long cracks with thin resin and then adding the thick stuff to the injector after the first few inches where the crack is easier to fill.But I am just a newbie so the veterans may correct me on my technique.When I was snooping around the internet about the .
Re: gm thick resin
thick resin is relly used for a high temp repairs. its good for bullseye and combos where the legs dont pass the coned area, :eusa_droo
Who is online
Users browsing this forum: No registered users and 24 guests