Resin not sticking/curing

Post your windshield repair tips, questions, advice! Note there is a sub-forum specifically for business development questions.
Win-tech

Post by Win-tech »

Ok, My wife has a small rock chip in her windshield. I tried to just use pit filler and cure it. I let the uv light sit there a few minutes and took it off and peeled the curing tape off. Just one problem, after I pulled the tape off the filler came off with it. I tried it several times letting the uv light sit longer and also used a different resin and still the same thing. Does anyone have any suggestions as to why it wont stick or cure maybe?

Eric
Delta Kits
Moderator
Posts: 1194
Joined: August 9th, 2003, 4:00 am
Enter the middle number please (3): 5
Location: Eugene OR
Contact:

free training

Post by Delta Kits »

Eric,

When you peel the tape off, the resin comes with it, but the resin is cured, correct?

If so, sounds like a Rain-X type contaminant is on the windshield.

If Rain-X has been applied to the windshield, it needs to be removed prior to doing repairs with any windshield repair resin.
Delta Kits, Inc.
Win-tech

Post by Win-tech »

Yes the resin is cured and is stuck to the tape.

This is a new mini and not even 6 mths old yet. I do most of the cleaning to the out side of the car and window cleaning. Even after the first failed attempt I went back a cleaned the window and still no luck. I dont know what else to do.

NO rainx on our cars. I hate that stuff.

Eric
Win-tech

Post by Win-tech »

Maybe I need to change window cleaners, any suggestions?

Eric
magicogar

Post by magicogar »

How about roughin' up the chip with your scribe or gently with a drill?
Delta Kits
Moderator
Posts: 1194
Joined: August 9th, 2003, 4:00 am
Enter the middle number please (3): 5
Location: Eugene OR
Contact:

Bridges,Bridges,Bridges

Post by Delta Kits »

Eric,

Has your van gone through a car wash or something?

If you spray a bit of water on your windshield, does it bead up?

Sometimes they have cleaners/waxes that can have this effect. Pretty rare though.
Delta Kits, Inc.
Win-tech

Umbrella

Post by Win-tech »

I first have to clarify, its not a mini van, its a mini cooper. No car washes either, always hand wash it.

Yes the water beads up on all the glass, but shouldnt window cleaner remove any wax or anything that would prevent the resin from sticking.

I just wonder if its the car wash soap that I use.

Eric
chips1144
Member
Posts: 253
Joined: May 23rd, 2004, 8:30 am

Post by chips1144 »

I bet its your car wash too, unless it was some old resin but I doubt that, Lucky Mrs Win-tech...
Delta Kits
Moderator
Posts: 1194
Joined: August 9th, 2003, 4:00 am
Enter the middle number please (3): 5
Location: Eugene OR
Contact:

Post by Delta Kits »

Since you used two different brands of resin, i'm like you, i'm leaning towards the soap you use...

You can use cerium oxide or pit polish to remove it. Cerium oxide is best, but pit polish will remove most things.
Delta Kits, Inc.
Win-tech

Post by Win-tech »

Delta Kits wrote:
You can use cerium oxide or pit polish to remove it. Cerium oxide is best, but pit polish will remove most things.
I will give the pit polish a try this evening and report back tomorrow on the outcome. Thanks for the help.

Eric
Post Reply

Who is online

Users browsing this forum: Google [Bot] and 1 guest